Anmol Chemicals is a company in Group, established in 1976, is the pioneer manufacturer of Sodium Acetate, Zinc Chloride etc. It has (FDA) GMP and GLP approval, ISO-9001 Certificate, "REACH" registration, ISO-22000 HACCP, Kosher Certificate and Halal Certificate.

Home --------- Contact

Product Links: Potassium Chloride --- Sodium Acetate --- Zinc Chloride --- Calcium Chloride --- Ammonium Chloride

Sodium Acetate Anhydrous & Trihydrate

GRADES AND SPECIFICATIONS OF SODIUM ACETATE TRI-HYDRATE CRYSTALS

SPECIFICATIONSSODIUM ACETATE TRIHYDRATE PURE
Assay99% Sodium Acetate Trihydrate minimum
AppearanceWhite Transparent Crystalline
Test SolutionA 10% Solution is clear & colourless
pH7.5-9
ArsenicLess than 1 ppm
Calcium & MagnesiumLess than 50 ppm
Heavy MetalsLess than 1 ppm
IronLess than 5ppm
ChloridesLess than 0.03%
SulphatesLess than 0.02%
PackingAs required

GRADES AND SPECIFICATIONS OF SODIUM ACETATE ANHYDROUS POWDER.

/tr>
SPECIFICATIONSSODIUM ACETATE ANHYDROUS PURE
Purity99 % minimum purity as CH3COONa
AppearanceSnow-White Powder
Clarity of 10% SolutionA 10% Solution w/v is clear and colourless
pH (10% in water)pH between 7.5-9
ArsenicArsenic < 1ppm.
Calcium and MagnesiumTo pass the test 50 ppm
Heavy MetalsHeavy Metals < 1ppm
IronIron < 5ppm
ChlorideChloride < 100ppm
Sulphate < 225ppmSulphate < 20ppm
Packing25kg(55 lbs)-50kg bags or pellets or as required

We offer Sodium Acetate IP Sodium Acetate BP Sodium Acetate USP Sodium Acetate Ph. Eur. and Extra Pure from a world class FDA approved, ISO-9001-2008 Certified facility

SODIUM ACETATE IP PHARMA GRADE

PARTICULARSSODIUM ACETATE IP GRADE
Dry Basis Assay99 to 101%
CharacteristicsColourless Crystals
SolubilitySoluble in 0.8 part of water and in 19 parts of Ethanol (96%)
Clarity and colour of 10% w/v solutionClear and Colourless
Alkalinity (pH of 5% solution)7.5-9.0
Arsenic2 ppm
Calcium and Magnesium (calculated as Ca)50 ppm
Heavy Metals as Lead10 ppm
Iron10 ppm
Chloride200 ppm
Sulphate200 ppm
Reducing SubstancesPasses test
PackingIn 50 Kg HDPE bag with HMHDPE liner

Sodium Acetate USP Specifications

Sodium Acetate USP
C2H3NaO2·3H2O 136.08

Assay— Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum
: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.

For an exhaustive Write-up on the product Manufacture, Specifications, Uses, Applications, MSDS etc. you may visit
The University of Sodium Acetate

Sodium Acetate BP USP IP ACS AR Analytical Reagent Food Grade

Sodium Acetate manufacturers at:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Manufacturers India

Ammonium bromide -- Aluminium chloride -- Aluminum chloride -- Ammonium sulfate -- Ammonium persulfate -- Barium chloride -- Benzyl Alcohol -- Boric Acid -- Calcium phosphate -- Calcium propionate -- Calcium Oxide -- Calcium Hydroxide -- Calcium Sulfate -- Copper sulfate sulphate -- Calcium saccharate -- Ceric ammonium nitrate -- Chromium Chloride -- Cinnamaldehyde Cinnamic aldehyde -- Cupric chloride -- Gentian Violet -- Magnesium Chloride -- Magnesium Sulfate -- Manganese Chloride -- Manganese Sulfate -- Methylene Blue -- Potassium iodide -- Potassium nitrate Potassium nitrite -- Sodium sulfate -- Mono di ammonium phosphate -- Potassium acetate -- Potassium bromide -- Potassium phosphate monobasic dibasic tribasic -- Sodium Bicarbonate -- Sodium Borate -- Sodium Bromide -- Sodium Diacetate -- Sodium hexametaphosphate -- Sodium Hydroxide Pellets -- Sodium nitrite Sodium nitrate -- Sodium phosphate monobasic dibasic tribasic -- Zinc nitrate –- Potassium Bitartrate -- Cream of Tartar

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.