Anmol Chemicals is the pioneer manufacturers of Potassium Chloride, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Potassium Chloride made in an ISO9001, ISO22000 (FSSC22000), cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Potassium Chloride is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home --------- Contact

Drum Packing Palletized Drum Packing 25-50kg or 55lbs bags. Paletized and Shrink Wrapped. Exports to USA UAE Europe South Africa Tanzania Kenya Egypt Uganda Turkey Brazil Chile Argentina Dubai. Jumbo Bag Packing Potassium Chloride BP IP USP ACS Analytical Reagent FCC Food Grade Manufacturers

Potassium Chloride BP USP Manufacturers

Arabic كلوريد البوتاسيوم مصنعين
German Kaliumchlorid hersteller
Dutch kaliumchloride fabrikanten
Italian  Produttori di cloruro di potassio
English potassium chloride manufacturers
Spanish Fabricantes de cloruro de potasio
French Fabricants de chlorure de potassium
Portuguese Fabricantes de cloreto de potássio

For MSDS Sheet Click Potassium Chloride GHS SDS, MSDS Sheet of Manufacturers

Potassium Chloride USP Specifications

Potassium Chloride USP
KCl 74.55

Assay— Potassium Chloride contains not less than 99.0 percent and not more than 100.5 percent of KCl, calculated on the dried basis.
Packaging and storage— Preserve in well-closed containers.
Labeling— Where intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 20) responds to the tests for Potassium and for Chloride.
Acidity or alkalinity— To a solution of 5.0 g in 50 mL of carbon dioxide–free water add 3 drops of phenolphthalein TS: no pink color is produced. Then add 0.30 mL of 0.020 N sodium hydroxide: a pink color is produced.
Loss on drying — Dry it at 105 for 2 hours: it loses not more than 1.0% of its weight.
Iodide or bromide
IODIDE
Standard stock solution— Transfer an accurately weighed quantity, about 41 mg, of potassium iodide to a 25-mL volumetric flask. Dissolve in and dilute with water to volume, and mix.
Standard solution— Dilute 1.0 mL of Standard stock solution with water to 25 mL, and mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as directed for Test solution beginning with “Add 1 mL each of chloroform”.
Test solution— Dissolve 2 g in 8 mL of water. Add 1 mL each of chloroform and diluted hydrochloric acid, then add 2 drops of a chloramine T solution (0.1 in 100), and shake gently. The violet color of the chloroform layer is not darker than that of a concomitantly prepared Standard solution: the limit is 0.005%.
BROMIDE—
Standard solution— Transfer an accurately weighed quantity, about 32 mg, of sodium bromide to a 25-mL volumetric flask. Dissolve in and dilute with water to volume, and mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as directed for Test solution beginning with “Add 1 mL each of chloroform”.
Test solution— Dissolve 2 g in 8 mL of water. Add 1 mL each of chloroform and diluted hydrochloric acid, then add 5 drops of a chloramine T solution (1 in 100), and shake gently. The brown color of the chloroform layer is not darker than that of a concomitantly prepared Standard solution: the limit is 0.1%.
Aluminum— where it is labeled as intended for use in hem dialysis— Proceed as directed using 2.0 g of Potassium Chloride to prepare the Test Preparation: the limit is 1 µg per g.
Calcium and magnesium— To 20 mL of a solution (1 in 100) add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Sodium— A solution (1 in 20), tested on a platinum wire, does not impart a pronounced yellow color to a non-luminous flame.
Heavy metals— Dissolve 2.0 g in 25 mL of water: the limit is 0.001%.
Organic volatile impurities: meets the requirements.


Potassium Chloride BP Specifications

Potassium Chloride BP
KCl 74.55

DEFINITION
Content

99.0 per cent to 100.5 per cent of KCl (dried substance).

CHARACTERS
Appearance

White or almost white, crystalline powder or colorless crystals.
Solubility
Freely soluble in water, practically insoluble in anhydrous ethanol.

IDENTIFICATION
It gives the reactions of chlorides.
Solution S gives the reactions of potassium.

TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colorless.
Acidity or alkalinity: To 50 ml of solution S add 0.1 ml of bromothymol blue solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the color of the indicator.
Bromides: Maximum 0.1 per cent.
Iodides: Moisten 5 g by the drop wise addition of a freshly prepared mixture of 0.15 ml of sodium nitrite solution, 2 ml of 0.5 M sulphuric acid, 25 ml of iodide-free starch solution and 25 ml of water. After 5 min, examine in daylight. The substance shows no blue color.
Sulphates: Maximum 300 ppm.
Aluminium: Maximum 1.0 ppm, if intended for use in the manufacture of hem dialysis solutions.
Barium: To 5 ml of solution S add 5 ml of distilled water and 1 ml of dilute sulphuric acid. After 15 min, any opalescence in the solution is not more intense than that in a mixture of 5 ml of solution S and 6 ml of distilled water.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca.
Sodium: Maximum 0.10 per cent, if intended for use in the manufacture of parenteral preparations or hem dialysis solutions.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105 C for 3h.

Potassium Chloride BP USP
Potassium Chloride ACC Food grade FCC
Potassium Chloride BP USP IP ACS FCC Food Grade

Potassium Chloride ACS FCC Food Grade manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Manufacturers India

Ammonium bromide -- Aluminium chloride -- Aluminum chloride -- Ammonium sulfate -- Ammonium persulfate -- Barium chloride  -- Benzyl Alcohol -- Boric Acid -- Calcium phosphate -- Calcium propionate -- Calcium Oxide -- Calcium Hydroxide -- Calcium Sulfate -- Copper sulfate sulphate -- Calcium saccharate -- Ceric ammonium nitrate -- Chromium Chloride -- Cinnamaldehyde Cinnamic aldehyde -- Cupric chloride -- Gentian Violet -- Magnesium Chloride -- Magnesium Sulfate -- Manganese Chloride -- Manganese Sulfate -- Methylene Blue -- Potassium iodide -- Potassium nitrate Potassium nitrite -- Sodium sulfate -- Mono di ammonium phosphate -- Potassium acetate -- Potassium bromide -- Potassium phosphate monobasic dibasic tribasic -- Sodium Bicarbonate -- Sodium Borate -- Sodium Bromide -- Sodium Diacetate -- Sodium hexametaphosphate -- Sodium Hydroxide Pellets -- Sodium nitrite Sodium nitrate -- Sodium phosphate monobasic dibasic tribasic -- Zinc nitrate –- Potassium Bitartrate -- Cream of Tartar

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.

Product Links: Ammonium Chloride-----Sodium Acetate----- Zinc Chloride-----Calcium Chloride